Aerating Machines

This page provides a survey of the aeration machines for which spare parts can be ordered from Wedge. In many cases you can directly select on machine type via the drop-down menu. You will automatically enter the database. If required, you can enter additional information, e.g. connecting diameter, type, quality and length.

Vertidrain fast series The 2 Vertidrain Mustang models (effective range: 1.3 and 1.7 m) are the fastest aeration units in the world at 4,3 km/hour. Moreover, they are able to enter the soil with solid and hollow tines further than conventional aeration machines: up to 15 cm! An average green can be vertically mowed in 10-15 minutes. Almost all large soccer pitches in the world use a Vertidrain Mustang. supplier: Redexim - Zeist

Vertidrain light series This Vertidrain series consists of 3 models. The self-powered model 7007 and the tractor pulled 7212 and 7316. These models are an ideal solution for vertically draining with solid tines and hollow tines up to 30 cm. supplier: Redexim - Zeist

Vertidrain heavy series The 75 series Vertidrain models are extremely solid and can be used up to 40 cm. The machines are available in 3 effective widths (1,6 m, 2.1 m and 2.6 m). These machines can even be used on extremely hard and stony soil. The model Goliat 405.250 reaches 60 cm. supplier: Redexim - Zeist

Level Spikers The Level Spikers can be provided with various knife and cog configurations and sizes. The 3 models (effective width 1.2 m, 1.7 m and 2.2 m) can work deeper than other equivalent units, because of the special weight system, transferring the weight of the tractor to the knives and the hollow tines. The 1.2 m model can be used on a truckster (Cushman, Workman, Gator). supplier: Redexim - Zeist

Wiedenmann Terra Spike These machines have been improved over the past few years. Advantages: working angle and depth are easy to adjust. supplier: Gebr. C. van de Pols - Zuidland

John Deere Aercore 800, 1000, 1500 en 2000 Tractor mounted machines with an extremely large capacity (more than 9,000 mē/hour). Thanks to the patented FlexiLink system, the high capacity does not affect the quality. Due to the toothed drive belts, the Aercores produce hardly any noise and require very little maintenance. supplier: Louis Nagel - Nijmegen

Toro ProCore 440/660/880 Extremely quiet working 3 point aeration machine, to be powered via the PTO. Can be used in combination with hollow pipes, tines and mini-tines. Available with an effective width of 100, 150 and 200 cm. supplier: Jean Heybroek BV - Houten

Rapidcore The RapidCore is a fast working, conventional vertical working aeration unit, which can be used with hollow tines in various sizes. Effective range: 1.6 m. Can be used up to 12.5 cm. supplier: Redexim - Zeist

Rapidcore

Jacobsen Aeroking A machine with which you also reach the smallest corners. No tractor required! supplier: Gebr. C. van de Pols - Zuidland

Ryan greensaire II & WG-24 A simple machine, ideal whenever you only have to do aeration work on an incidental basis. supplier: Gebr. C. van de Pols - Zuidland

Ryan Greensaire II & WG-24

Ryan GA 30 The big sibling of the Ryan greensaire II & WG-24. No need to walk behind the machine, simply ride along with it. supplier: Gebr. C. van de Pols - Zuidland

Ryan GA 30

Cushman GA 60 This machine has an enormous capacity, just like the other Ryan machines from Textron. Available with a petrol engine or PTO driven. supplier: Gebr. C. van de Pols - Zuidland

Cushman GA 60

Cushman Quick Aerator A creasing unit for installation on a Cushman or small tractor. supplier: Gebr. C. van de Pols - Zuidland

Cushman Quick Aerator

Ryan Tracaire A fixed creasing unit for installation on the 3 point lifting device of a tractor. supplier: Gebr. C. van de Pols - Zuidland

Ryan Tracaire

Ryan Renovaire A creasing unit consisting of six separate elements, guaranteeing that the grass is perfectly followed. supplier: Gebr. C. van de Pols - Zuidland

Ryan Renovair

Ransomes TM 80 A top layer creasing machine consisting of a fixed shaft with knives or hollow pipes. This machine is to be attached to the 3 point lifting device of a tractor. supplier: Gebr. C. van de Pols - Zuidland

Ransomes TM 80

Sisis specialised in the field of creasing machines, presents four types, up to a depth of 40 cm. supplier: Motrac - Zutphen

Toro Greensaerator A sturdy machine for the accurate aeration of greens and tees. Cuts vertically without deforming the hole. supplier: Jean Heybroek BV - Houten

Toro Greens Aerator

Toro Fairway Aerator A highly efficient aerator for large surfaces. The aerator is to be driven via the PTO of a tractor. Can be used in combination with hollow pipes, pins and mini-tines. supplier: Jean Heybroek BV - Houten

Toro Fairway Aerator

Toro Turf Aerator 686/687/96 Provided with cutting knives with a length of 10 or 15 cm. supplier: Jean Heybroek BV - Houten

Coremaster This company was one of the first manufacturers of top layer aeration units with hollow and solid pins. No information available yet on a supplier for the Netherlands.

Coremaster

Earth Quake The Earth Quake is a revolutionary development in the field of fighting soil compaction. Rotating knives provide a shake effect which loosens the soil without damaging the surface. Also suitable for greens! Effective depth up to 55 cm. supplier: Imants - Reusel

Imants Venus A multifunctional machine. Available for the 3-point lifting device of your tractor or as pulled machine, with smooth roller, cutting roller with 40 or 15° knives or hollow pipe aeration unit. The Venus 3-5 or 7 is a modular creasing unit which is able to follow the outlines of the surface. supplier: Imants - Reusel

Koro Recycling Dresser The Koro Recycling dresser has been designed in the field. During extensive maintenance works a field had to be aerated and provided with sand. This machine is able to do both jobs in one run, with the sand coming from the top layer. The smaller versions have been especially developed for golf greens and golf tees. supplier: Gebr. C. van de Pols - Zuidland